router : multicast6
 
multicast6
Use this command to configure the FortiGate unit as an IPv6 Protocol Independent Multicast (PIM) version 2 router.
Syntax
config router multicast6
set multicast-routing {enable | disable}
config interface
edit <interface_name>
set hello-holdtime <holdtime_integer>
set hello-interval <hello_integer>
end
config pim-sm-global
config rp-address
edit <id_int>
set ip6-address <ip6_addr>
end
end
end
Variable
Description
Default
multicast-routing {enable | disable}
Enable or disable IPv6 multicast routing.
disable
config interface fields
edit <interface_name>
Enter the name of the FortiGate unit interface on which to enable PIM protocols.
No default.
hello-holdtime <holdtime_integer>
Specify the amount of time (in seconds) that a PIM neighbor may consider the information in a hello message to be valid. The range is from 1 to 65 535.
If the hello-interval attribute is modified and the hello-holdtime attribute has never been set explicitly, the hello-holdtime attribute is automatically set to 3.5 x hello-interval.
105
hello-interval <hello_integer>
Set the amount of time (in seconds) that the FortiGate unit waits between sending hello messages to neighboring PIM routers. The range is from 1 to 65 535.
Changing the hello-interval attribute may automatically update the hello-holdtime attribute .
30
config pim-sm-global / config rp-address fields
ip6-address <ip6_addr>
Enter the RP router IP address.
::