router : isis : config isis-interface
 
config isis-interface
Configure and enable FortiGate unit interfaces for IS-IS.
Variable
Description
Default
edit <interface_str>
Edit an IS-IS interface.
 
auth-keychain-l1 <keychain_str>
Authentication key-chain for level 1 PDUs. Available when auth-mode-l1 is set to md5.
 
auth-keychain-l2 <keychain_str>
Authentication key-chain for level 2 PDUs. Available when auth-mode-l2 is set to md5.
 
auth-mode-l1 {md5 | password}
Level 1 authentication mode.
password
auth-mode-l2 {md5 | password}
Level 2 authentication mode.
password
auth-password-l1 <password>
Authentication password for level 1 PDUs. Available when auth-keychain-11 is set to password.
 
auth-password-l2 <password>
Authentication password for level 2 PDUs. Available when auth-keychain-12 is set to password.
 
auth-send-only-l1 {enable | disable}
Level 1 authentication send-only.
disable
auth-send-only-l2 {enable | disable}
Level 2 authentication send-only.
disable
circuit-type {level‑1 | level-1-2 | level‑2‑only}
Set the ISIS circuit type to use for the interface. IS-IS routers are designated as being: Level 1 (intra-area); Level 2 (inter area); or Level 1-2 (both).
level-1-2
csnp-interval-l1 <interval_int>
Level 1 CSNP interval. The range is 1-65535 seconds.
10
csnp-interval-l2 <interval_int>
Level 2 CSNP interval. The range is 1-65535 seconds.
10
hello-interval-l1 <interval_int>
Level 1 hello interval. The range is 1-65535 seconds. Set to 0 for a one-second hold time.
10
hello-interval-l2 <interval_int>
Level 2 hello interval. The range is 1-65535 seconds. Set to 0 for a one-second hold time.
10
hello-multiplier-l1 <multipler_int>
Level 1 multiplier for Hello holding time. The range is 2 to 100.
3
hello-multiplier-l2 <multipler_int>
Level 2 multiplier for Hello holding time. The range is 2 to 100.
3
hello-padding {enable | disable}
Enable or disable adding padding to IS-IS hello packets.
disable
lsp-interval <interval_int>
LSP transmission interval (milliseconds). The range is 1-4294967295.
33
lsp-retransmit-interval <interval_int>
LSP retransmission interval (seconds). The range is 1-65535.
5
mesh-group {enable | disable}
Enable IS-IS mesh group.
disable
mesh-group-id <id_int>
Mesh group ID. The range is 0-4294967295. A value of 0 means the mesh group is blocked.
0
metric-l1 <metric_int>
Level 1 metric for interface. The range is 1-63.
10
metric-l2 <metric_int>
Level 2 metric for interface. The range is 1-63.
10
network-type {broadcast | point‑to‑point}
Set the IS-IS interface's network type.
 
priority-l1 <priority_int>
Level 1 priority. The range is 0-127.
64
priority-l2 <priority_int>
Level 2 priority. The range is 0-127.
64
status {enable | disable}
Enable the interface for IS-IS.
disable
wide-metric-l1 <metric_int>
Level 1 wide metric for the interface. The range is 1-16777214.
10
wide-metric-l2 <metric_int>
Level 2 wide metric for the interface. The range is 1-16777214.
10