netscan : settings
 
settings
Use this command to configure network vulnerability scanner settings that control when scans are run.
Syntax
config netscan settings
set day-of-month <day_int>
set day-of-week {monday | tuesday | wednesday | thursday | friday | saturday | sunday}
set os-detection {enable | disable | auto}
set pause-from <time_str>
set pause-to <time_str>
set recurrence {daily | monthly | weekly}
set scan-mode {full | quick | standard}
set scheduled-pause {enable | disable | default}
set service-detection {enable | disable | auto}
set tcp-scan {enable | disable | auto}
set time <hh:mm>
set udp-scan {enable | disable | auto}
end
Variables
Description
Default
day-of-month <day_int>
Enter the day of the month on which to run scans. You can only select one day. This option is only available if schedule is enabled and recurrence is monthly.
1
day-of-week {monday | tuesday | wednesday | thursday | friday | saturday | sunday}
Select the day of the week on which to run scans. You can only select one day. This option is only available if schedule is enabled and recurrence is weekly.
sunday
os-detection {enable | disable | auto}
Enable or disable host operating system detection, or select auto to use the default setting for this type of scan.
auto
pause-from <time_str>
Enter the time, in hh:mm format, when network scanning pause begins.
00:00
pause-to <time_str>
Enter the time, in hh:mm format, when network scanning pause ends.
00:00
recurrence {daily | monthly | weekly}
Set scheduled scans to run once a day, once a month, or once a week.
weekly
scan-mode {full | quick | standard}
Specify the scan mode to use:
full — scan all TCP and UDP ports
quick — perform a quick scan of commonly used TCP and UDP ports
standard — perform a standard scan of more ports than the quick scan but not all ports.
quick
scheduled-pause {enable | disable | default}
Enable or disable scheduled pause in network scanning, or use default setting.
default
service-detection {enable | disable | auto}
Enable or disable explicit service detection, or select auto to use the default setting for this type of scan.
auto
tcp-scan {enable | disable | auto}
Enable or disable TCP scan, or select auto to use the default setting for this type of scan.
auto
time <hh:mm>
Enter the time of day on which to start a scan.
00:00
udp-scan {enable | disable | auto}
Enable or disable UDP scan, or select auto to use the default setting for this type of scan.
auto