log : memory global-setting
 
memory global-setting
Use this command to configure log threshold warnings, as well as the maximum buffer lines, for the FortiGate system memory.
The FortiGate system memory has a limited capacity and displays only the most recent log entries. Traffic logs are not stored in the memory buffer, due to the high volume of traffic information. After all available memory is used, by default, the FortiGate unit begins to overwrite the oldest log messages. All log entries are deleted when the FortiGate unit restarts.
Syntax
config log memory global-setting
set full-final-warning-threshold
set full-first-warning-threshold
set full-second-warning-threshold
set max-size <int>
end
Variable
Description
Default
full-final-warning-threshold
Enter to configure the final warning before reaching the threshold. You can enter a number between 3 and 100.
95
full-first-warning-threshold
Enter to configure the first warning before reaching the threshold. You can enter a number between 1 and 98.
75
full-second-warning-threshold
Enter to configure the second warning before reaching the threshold. You can enter a number between 2 and 99.
90
max-size <int>
Enter the maximum size of the memory buffer log, in bytes.
98304