icap : server
 
server
Use this command to configure Internet Content Adaptation Protocol (ICAP) servers.
Syntax
config icap server
edit <icap_server_name>
set ip-version {4 | 6}
set ip-address <server_ipv4>
set ip6-address <server_ipv6>
set max-connections <int>
set port <port_int>
end
Variable
Description
Default
<icap_server_name>
Enter the ICAP profile name.
 
ip-version {4 | 6}
Select IPv4 or IPv6 addressing.
4
ip-address <server_ipv4>
Enter the ICAP server IP address (IPv4).
0.0.0.0
ip6-address <server_ipv6>
Enter the ICAP server IP address (IPv6).
::
max-connections <int>
Enter the maximum permitted number of concurrent connections to the ICAP server. Range: 1-65 535.
100
port <port_int>
Enter the ICAP server port number.
1344