firewall : shaper traffic-shaper
 
shaper traffic-shaper
Use this command to configure shared traffic shaping that is applied to and shared by all traffic accepted by a firewall policy. As with the per-IP traffic shaper, you select shared traffic shapers in firewall policies.
Syntax
config firewall shaper traffic-shaper
edit <name_str>
set diffserv {enable | disable}
set diffservcode <binary>
set guaranteed-bandwidth <bandwidth_value>
set maximum-bandwidth <bandwidth_value>
set per-policy {enable | disable}
set priority {high | low | medium}
end
end
Variable
Description
Default
edit <name_str>
Enter the name of the traffic shaper.
No default.
diffserv {enable | disable}
Enable to start differentiated services on network traffic. DiffServ enables classifying network traffic and quality of service (QoS) guarantees on IP networks.
disable
diffservcode <binary>
Enter a 6 digit differentiate services code point (DSCP) binary code to match in the header of traffic to classify traffic. This code will be used to match traffic for this traffic shaper.
000000
guaranteed-bandwidth <bandwidth_value>
Enter the amount of bandwidth guaranteed to be available for traffic controlled by the policy. bandwidth_value can be 0 to 16 776 000 Kbits/second.
0
maximum-bandwidth <bandwidth_value>
Enter the maximum amount of bandwidth available for traffic controlled by the policy. bandwidth_value can be 0 to 16 776 000 Kbits/second. If maximum bandwidth is set to 0 no traffic is allowed by the policy.
0
per-policy {enable | disable}
Enable or disable applying this traffic shaper to a single firewall policy that uses it.
disable
priority {high | low | medium}
Select the priority level for traffic controlled by the policy.
high