firewall : multicast-address
 
multicast-address
Use this command to configure multicast firewall addresses used in firewall multicast policies.
Addresses, address groups, and virtual IPs must have unique names to avoid confusion in firewall policies. If an address is selected in a policy, it cannot be deleted until it is deselected from the policy.
Syntax
config firewall multicast-address
edit <name_str>
set associated-interface <interface_str>
set color <color_int>
set comment <comment_string>
set end-ip <address_ipv4>
set start-ip <address_ipv4>
set subnet <ip4mask>
set tags <tags_str>
set type {broadcastmask | multicastrange}
set visibility {enable | disable}
end
Variable
Description
Default
<name_str>
Enter the name of the address. There are also predefined addresses: Bonjour, EIGRP, OSPF, all_hosts, all_routers.
No default.
associated-interface <interface_str>
Enter the name of the associated interface.
If not configured, the firewall address is bound to an interface during firewall policy configuration.
No default.
color <color_int>
Set the icon color to use in the web-based manager.
0 sets the default, color 1.
0
comment <comment_string>
Enter a descriptive comment for this address.
No default.
end-ip <address_ipv4>
If type is iprange, enter the last IP address in the range.
0.0.0.0
start-ip <address_ipv4>
If type is iprange, enter the first IP address in the range.
0.0.0.0
subnet <ip4mask>
Enter a broadcast IP/mask to be treated as multicast address. Available when type is broadcastmask.
0.0.0.0 0.0.0.0
tags <tags_str>
Enter object tags applied to this address. Separate tag names with spaces.
null
type {broadcastmask | multicastrange}
Select the type of multicast address:
broadcastmask—define a broadcast IP/mask in subnet to be treated as multicast address.
multicastrange—define multicast IP address range in start-ip and end-ip.
multicastrange
visibility {enable | disable}
Select whether this address is available in firewall multicast policy address fields in the web-based manager.
enable