extender-controller : extender
 
extender
Use this command to configure the FortiExtender controller.
Syntax
config extender-controller extender
edit <extender-sn>
set aaa-shared-secret <pwd_str>
set access-point-name <name_str>
set admin {enable | discovered | disable}
set at-dial-script <at_str>
set billing-start-day <day_int>
set cdma-aaa-spi <spi_str>
set cdma-ha-spi <spi_str>
set cdma-nai <nai_str>
set description <descr_str>
set ext-name <name_str>
set ha-shared-secret <scr_str>
set initiated-update {enable | disable}
set modem-passwd <pwd_str>
set multi-mode {auto | auto‑3G | force‑lte | force‑3g | force‑2g}
set ppp-auth-protocol {auto | pap | chap}
set ppp-echo-request {enable | disable}
set ppp-password <pwd_str>
set ppp-username <usr_str>
set primary-ha <str>
set quota-limit-mb <quota_int>
set redial <int>
set roaming {enable | disable}
set role {primary | secondary | none}
set secondary-ha <str>
set sim-pin <passwd>
set wimax-auth-protocol {tls | ttls}
set wimax-carrier <str>
set wimax-realm <str>
end
Variable
Description
Default
<extender-sn>
Enter the FortiExtender unit serial number.
No default.
aaa-shared-secret <pwd_str>
Enter the AAA shared secret.
null
access-point-name <name_str>
Enter the Access Point Name (APN).
null
admin {enable | discovered | disable}
Set the administration mode for this unit.
enable — manage this FortiExtender unit
discovered — manage discovered units
disable —do not manage this FortiExtender unit.
disable
at-dial-script <at_str>
Enter the initialization AT command string for the modem.
null
billing-start-day <day_int>
Enter the day of the month when the billing period starts. Range 1 to 28.
1
cdma-aaa-spi <spi_str>
Enter the CDMA AAA SPI (for CDMA modem).
null
cdma-ha-spi <spi_str>
Enter the CDMA HA SPI (for CDMA modem).
null
cdma-nai <nai_str>
Enter the CDMA NAI (for CDMA modem).
null
description <descr_str>
Optionally, enter a description.
null
ext-name <name_str>
Enter a name for the FortiExtender unit.
null
ha-shared-secret <scr_str>
Enter the HA shared secret.
null
initiated-update {enable | disable}
Enable or disable network-initiated modem updates.
disable
modem-passwd <pwd_str>
Enter the modem password.
null
multi-mode {auto | auto‑3G | force‑lte | force‑3g | force‑2g}
Select multi-mode operation. auto‑3g enables automatic selection of modes 3G or less.
auto
ppp-auth-protocol {auto | pap | chap}
Select the PPP authentication protocol.
auto
ppp-echo-request {enable | disable}
Enable or disable PPP echo request.
disable
ppp-password <pwd_str>
Enter the PPP password.
null
ppp-username <usr_str>
Enter the PPP user name.
null
primary-ha <str>
The modem automatically negotiates this value.
null
quota-limit-mb <quota_int>
Set the monthly quota limit in MBytes. Range 0 to 10 485 760.
0
redial <int>
Set number of redial attempts allowed on failed call attempts. Range 1 to 10 or none (forever).
none
roaming {enable | disable}
Enable or disable GSM/LTE roaming.
disable
role {primary | secondary | none}
Select the FortiExtender role: Primary, Secondary (standby), or None (no service).
none
secondary-ha <str>
The modem automatically negotiates this value.
null
sim-pin <passwd>
Enter the SIM PIN.
null
wimax-auth-protocol {tls | ttls}
Select the WiMax authentication protocol: TLS or TTLS.
tls
wimax-carrier <str>
Enter the WiMax carrier name.
null
wimax-realm <str>
Enter the WiMax realm.
null