How to set up your FortiDB : Configuring the network settings
 
Configuring the network settings
You can configure the FortiDB unit to operate in your network using either the web UI Network Configuration page or the CLI. These basic network settings include interfaces, DNS settings and static routes.
 
You can use either of the following formats to specify IP address/network-mask pairs:
Dotted-decimal (for example, 192.168.1.1/255.255.255.0)
Bit representation (for example, 192.168.1.1/24)
See also
Configuring network settings using the web UI
Configuring network settings using the CLI