Using the command line interface (CLI) : Overview of commands
 
Overview of commands
 
Command branch
Supported commands
Description
system admin setting
system backup all-settings
system debug filter
system dns
system global
system interface
system ntp
system raid
system route
Use config to configure objects of FortiDB functionality. Top-level objects are not configurable; they are containers for more specific lower-level objects. For example, the system object contains DNS addresses, interfaces, routes and so on. When these objects are multiple, such as routes, they are organized in the form of a table. You can add, delete or edit the entries in the table. Table entries each consist of keywords that you can set to particular values. Simpler objects, such as system DNS, are a single set of keywords.
backup all-settings
backup fd-tcpdump
backup-remove fd-archive
backup-remove fd-report
backup-remove fd-tcpdump
date
format disk
generate certificate
ping
raid rebuild
reboot
reset
restart
restore all-settings
restore fd-archive
shutdown
time
top
traceroute
Use execute to run static commands, to reset the FortiDB unit to factory defaults, or to back up or restore the FortiDB configuration. The execute commands are available only from the root prompt.
system admin setting
system backup all-settings
system dns
system global
system interface
system ntp
system route
Use show to display the FortiDB unit configuration. Only changes to the default configuration are displayed. You can use show within a config shell to display the configuration of that shell, or you can use show with a full path to display the configuration of the specified shell.
counter memory
counter misc
counter packet
counter parser
counter session
debug application control basic
debug application housekeep basic
debug application parser basic
debug application parser packet
debug application sniffer abnormal
debug application sniffer basic
debug application sniffer block-ip
debug application sniffer block-session
debug application sniffer ip-reassemble
debug application sniffer malformed-packet
debug application sniffer packet
debug application sniffer tcp-reassemble
mapping debug
mapping reset
mapping status
log show|tail|remove
system export fd_log
system raid list
tcpdump start|stop
tcpdump status
network interface list
network interface detail
network interface list
network interface detail
Use diagnose commands to set debug parameters, view detailed information about Ethernet interfaces or to send diagnostic information to an FTP server.
See also
get
set