execute > execute discovery-glb-virtual-server

execute discovery-glb-virtual-server

Use this command to populate the global load balancing server configuration virtual server list for the specified virtual server.

Syntax

execute discovery-glb-virtual-server {server|override-server} <servername>

{server|override-server} <servername>

Use server <servername> to populate the virtual server member list with virtual servers from the local FortiADC configuration. <servername> is the name of the global-load-balance servers configuration. After the list had been populated, you can edit the configuration to add a gateway health check.

Use override-server <servername> to discover the virtual server configuration and overwrite any local configuration information for those servers.

Example

FortiADC-VM # config global-load-balance servers

 

FortiADC-VM (servers) # edit FortiADC-2

 

FortiADC-VM (FortiADC-2) # set data-center United_States

FortiADC-VM (FortiADC-2) # set ip 172.30.144.100

FortiADC-VM (FortiADC-2) # set server-type FortiADC-SLB

FortiADC-VM (FortiADC-2) # set sync-status enable

 

FortiADC-VM (FortiADC-2) # show

config global-load-balance servers

edit "FortiADC-2"

set sync-status enable

set ip 172.30.144.100

set data-center United_States

config virtual-server-list

end

next

end

 

FortiADC-VM (FortiADC-2) # end

 

FortiADC-VM # execute discovery-glb-virtual-server server FortiADC-2

 

FortiADC-VM # show global-load-balance servers FortiADC-2

config global-load-balance servers

edit "FortiADC-2"

set sync-status enable

set ip 172.30.144.100

set data-center United_States

config virtual-server-list

edit "mail_example_com"

set ip 192.0.2.2

set port 80

next

edit "www_example_com"

set ip 192.0.2.1

set port 811

next

end

next

end

 

FortiADC-VM # config global-load-balance servers

 

FortiADC-VM (servers) # edit FortiADC-2

 

FortiADC-VM (FortiADC-2) # config virtual-server-list

 

FortiADC-VM (virtual-server~l) # show

config virtual-server-list

edit "mail_example_com"

set ip 192.0.2.2

set port 80

next

edit "www_example_com"

set ip 192.0.2.1

set port 811

next

end

 

FortiADC-VM (virtual-server~l) # edit www_example_com

FortiADC-VM (www_example_com) # set gateway US-ISP1

FortiADC-VM (www_example_com) # end

 

FortiADC-VM (FortiADC-2) # end