diagnose : diagnose hardware ioport
 
diagnose hardware ioport
Use this command to display I/O information that might be useful in debugging.
Syntax
diagnose hardware {get|set} ioport {byte|word|long} <address_hex>
ioport
Specify whether to read byte, word, or long from the port.
address_hex
The hexadecimal address of the I/O port.
Example
First, use the diagnose hardware sysinfo command to find the address hex number for the port you want to diagnose:
FortiADC-VM # diagnose hardware get sysinfo ioports
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:07.1
0170-0177 : piix
01f0-01f7 : 0000:00:07.1
01f0-01f7 : piix
02f8-02ff : serial
0376-0376 : 0000:00:07.1
0376-0376 : piix
03c0-03df : vga+
03f6-03f6 : 0000:00:07.1
03f6-03f6 : piix
03f8-03ff : serial
0cf0-0cf1 : pnp 00:00
0cf8-0cff : PCI conf1
0d00-feff : PCI Bus 0000:00
1000-103f : 0000:00:07.3
1000-103f : pnp 00:00
1000-1003 : ACPI PM1a_EVT_BLK
1004-1005 : ACPI PM1a_CNT_BLK
1008-100b : ACPI PM_TMR
100c-100f : ACPI GPE0_BLK
1010-1015 : ACPI CPU throttle
1040-104f : 0000:00:07.3
1040-104f : pnp 00:00
1060-107f : pnp 00:0b
1080-10bf : 0000:00:07.7
10c0-10cf : 0000:00:07.1
10c0-10cf : piix
10d0-10df : 0000:00:0f.0
1400-14ff : 0000:00:10.0
2000-3fff : PCI Bus 0000:02
4000-4fff : PCI Bus 0000:03
4000-400f : 0000:03:00.0
5000-5fff : PCI Bus 0000:0b
5000-500f : 0000:0b:00.0
6000-6fff : PCI Bus 0000:13
6000-600f : 0000:13:00.0
7000-7fff : PCI Bus 0000:1b
7000-700f : 0000:1b:00.0
8000-8fff : PCI Bus 0000:04
8000-800f : 0000:04:00.0
9000-9fff : PCI Bus 0000:0c
9000-900f : 0000:0c:00.0
a000-afff : PCI Bus 0000:14
a000-a00f : 0000:14:00.0
b000-bfff : PCI Bus 0000:1c
b000-b00f : 0000:1c:00.0
c000-cfff : PCI Bus 0000:05
c000-c00f : 0000:05:00.0
d000-dfff : PCI Bus 0000:0d
d000-d00f : 0000:0d:00.0
e000-efff : PCI Bus 0000:15
 
Then, use the diagnose hardware ioport command to display the ioport value:
FortiADC-VM # diagnose hardware get ioport long 001f
inl(001f)=ffffffff