config system : config system snmp sysinfo
 
config system snmp sysinfo
Use this command to configure SNMP settings.
Before you begin:
• You must have read-write permission for system settings.
Syntax
config system snmp sysinfo
set contact <string>
set description <string>
set location <string>
set status {enable|disable>
end
contact
Contact information for the administrator or other person responsible for this system, such as a phone number (555-5555) or name (jdoe). The contact information can be up to 35 characters long, and can contain only letters (a-z, A-Z), numbers, hyphens ( ‑ ) and underscores ( _ ).
description
A description or comment about the system, such as dont‑reboot. The description can be up to 35 characters long, and can contain only letters (a-z, A-Z), numbers, hyphens ( ‑ ) and underscores ( _ ).
location
Physical location of the appliance, such as floor2. The location can be up to 35 characters long, and can contain only letters (a-z, A-Z), numbers, hyphens ( ‑ ) and underscores ( _ ).
status
Enable/disable the SNMP agent, so that the system can send traps and receive queries.
Example
FortiADC-VM # get system snmp sysinfo
status : disable
description :
location :
contact :
 
FortiADC-VM # config system snmp sysinfo
FortiADC-VM (sysinfo) # set status enable
FortiADC-VM (sysinfo) # end
 
FortiADC-VM # get system snmp sysinfo
status : enable
description :
location :
contact :