config log setting highspeed
Use this command to configure high speed logging.
The high speed log feature is intended for deployments that require a high volume of logging activity. The logs are sent in binary format so they can be sent at a high speed. If you want to use high speed logging, contact Fortinet to obtain a utility for handling the binary format.
The feature supports traffic logs. Event logs and security logs are not supported.
Before you begin:
• You must have read-write permission for log settings.
Syntax
config log setting highspeed
set server <string>
set status {enable | disable}
set traffic-log-status {enable | disable}
set traffic-log-category {slb|dns}
set udpport <integer>
end
server | IP address of the syslog server. |
status | Enable/disable the configuration. |
traffic-log-status | Enable/disable logging for traffic processed by the load balancing modules. |
traffic-log-category | • slb—Send server load balancing logs. • dns—Send global load balancing logs. |
udpport | Listening port number of the syslog server. Usually this is UDP port 514. |