execute commands
You can use the command-line interface (CLI) execute commands to run system management utilities, such as backups, upgrades and reboots; and network diagnostic utilities, such as nslookup, ping, traceroute, and tcpdump.
The following example shows the list of execute commands:
FortiADC-VM # execute ?
backup backup
caching caching management
certificate certificate
checklogdisk find and correct errors on the log disk
date set/get date and time
factoryreset reset to factory default
formatlogdisk format log disk to enhance performance
log log management
nslookup nslookup
ping ping <host name | host ip>
ping-option ping option settings
ping6 ping <host name | host ipv6>
ping6-option ping6 option settings
reboot reboot the system
reload reload appliance
restore restore
shutdown shutdown appliance
tcpdump tcpdump <Port Number> [filter]
tcpdump-file tcpdump-file
traceroute traceroute
vmware vmware
For details, see the
FortiADC CLI Reference.