get : get router info ospf
 
get router info ospf
Use this command to display status for OSPF.
Syntax
FortiADC-VM # get router info ospf ?
database database
interface show ospf interfaces
neighbor show ospf neighbors
route show ospf routing table
status show ospf status
 
FortiADC-VM # get router info ospf database ?
asbr-summary show ospf database ASBR summary link states
brief show ospf LSA list
external show ospf database external link states
max-age LSAs in MaxAge list
network show ospf database network link states
nssa-external show ospf database NSSA external link states
router show ospf database router link states
self-originate show ospf database self-originated link states
summary show ospf database network summary link states
 
Example
FortiADC-VM # get router info ospf status
OSPF Routing Process, Router ID: 1.1.1.2
Supports only single TOS (TOS0) routes
This implementation conforms to RFC2328
RFC1583Compatibility flag is disabled
OpaqueCapability flag is disabled
Initial SPF scheduling delay 200 millisec(s)
Minimum hold time between consecutive SPFs 1000 millisec(s)
Maximum hold time between consecutive SPFs 10000 millisec(s)
Hold time multiplier is currently 1
SPF algorithm has not been run
SPF timer is inactive
Refresh timer 10 secs
Number of external LSA 0. Checksum Sum 0x00000000
Number of opaque AS LSA 0. Checksum Sum 0x00000000
Number of areas attached to this router: 0
 
FortiADC-VM # get router info ospf database summary
 
OSPF Router with ID (1.1.1.2)