diagnose netlink ip/ipv6
Use these commands to list interface details, or to add or delete a physical network interface.
| Back up the configuration before deleting a network interface table entry. |
Syntax
diagnose netlink <ip|ipv6> add <interface_name> <ipaddress> <netmask>
diagnose netlink <ip|ipv6> delete <interface_name> <ipaddress>
diagnose netlink <ip|ipv6> flush
diagnose netlink <ip|ipv6> list
<interface_name> | Name of the interface to add or delete from the network interface table. |
<ipaddress> | IP address of the network interface. |
<netmask> | Subnet mask. |
Example
FortiADC-VM # FortiADC-VM # diagnose netlink ip ?
add add netlink ip address
delete delete netlink ip address
flush flush netlink ip address
list list netlink ip address
FortiADC-VM # diagnose netlink ip list
IP=127.0.0.1 MASK=255.255.255.0 index=1 devname=lo
IP=127.129.1.1 MASK=255.255.255.255 index=1 devname=lo
IP=172.30.144.100 MASK=255.255.252.0 index=4 devname=port1
IP=10.1.1.1 MASK=255.255.255.255 index=4 devname=port1
IP=7.7.7.7 MASK=255.255.255.255 index=7 devname=port2
IP=5.5.5.5 MASK=255.255.255.255 index=7 devname=port2
IP=11.11.11.11 MASK=255.255.255.255 index=7 devname=port2
IP=12.12.12.12 MASK=255.255.255.255 index=7 devname=port2
IP=172.0.0.9 MASK=255.255.255.255 index=7 devname=port2
IP=172.0.0.8 MASK=255.255.255.255 index=7 devname=port2
IP=172.0.0.7 MASK=255.255.255.255 index=7 devname=port2
IP=172.0.0.6 MASK=255.255.255.255 index=7 devname=port2
IP=172.0.0.5 MASK=255.255.255.255 index=7 devname=port2
IP=172.0.0.4 MASK=255.255.255.255 index=7 devname=port2
IP=172.0.0.3 MASK=255.255.255.255 index=7 devname=port2
IP=172.0.0.2 MASK=255.255.255.255 index=7 devname=port2
IP=172.0.0.1 MASK=255.255.255.255 index=7 devname=port2
IP=172.0.0.0 MASK=255.255.255.255 index=7 devname=port2
IP=1.1.100.1 MASK=255.255.255.255 index=7 devname=port2
IP=1.1.100.2 MASK=255.255.255.255 index=7 devname=port2
IP=169.254.160.134 MASK=255.255.0.0 index=17 devname=haport0