SNMP Commands

The parameters in the SNMP context specify return values for the following Object IDs (OIDs) in the FortiADC SNMP Management Information Base (MIB):

Parameter	Default Value	Description
community	FortiADC	Any SNMP management console needs to send the correct community string along with all SNMP requests. If the sent community string is not correct, FortiADC discards the request and will not respond.
contact	public	Contact is the name of the person responsible for this unit.
description	FortiADC	This is the user-assigned description of the FortiADC.
location	location	Location describes FortiADC’s physical location.
name	FortiADC	This is the name assigned to the system. By default it is FortiADC .
serverip	VLAN IP	To configure the SNMP agent to listen and respond on a particular IP address, enter the address.
serverport	162	This is optional. If not entered, the default trap server port (162) will be used.

OID

Parameter

Default Value

Description

community

FortiADC

Any SNMP management console needs to send the correct community string along with all SNMP requests. If the sent community string is not correct, FortiADC discards the request and will not respond.

contact

public

Contact is the name of the person responsible for this unit.

description

FortiADC

This is the user-assigned description of the FortiADC.

location

Location describes FortiADC’s physical location.

name

FortiADC

This is the name assigned to the system. By default it is FortiADC .

serverip

VLAN IP

To configure the SNMP agent to listen and respond on a particular IP address, enter the address.

serverport

162

This is optional. If not entered, the default trap server port (162) will be used.

The following tables list the SNMP context commands:

Using SNMP commands in the global context:

Using SNMP Commands in the Global Context
eqcli > no snmp cmd	:	Reset the specified parameter to its default value
eqcli > show snmp	:	Display SNMP parameter settings
eqcli > snmp	:	Change to the “snmp" context (see below)

Using SNMP context commands

SNMP Context Commands
eqcli snmp> community string	:	Set the SNMP community address.
eqcli snmp> contact string	:	Set the SNMP contact address.
eqcli snmp> context string	:	Display the current command context.
eqcli snmp> description string	:	Set the SNMP description
eqcli snmp> location string	:	Set the SNMP location.
eqcli snmp> name string	:	Set the SNMP name.
eqcli snmp> serverip ip	:	Set an snmp trap server IP.
eqcli snmp> serverport port	:	Set an snmp trap server port.
eqcli snmp> show	:	Display SNMP parameter configuration

Downloading FortiADC MIB Files

The MIB files can be downloaded from FortiADC using a browser pointed at:

http://<FortiADC>/eqmanual/<mibname>.my