The table below lists the global configuration commands that are available in the global context of the CLI. These commands allow you to:
Global Commands | ||
---|---|---|
eqcli > alerts | : | Global Enable/Disable alerts. |
eqcli > agr |
: | Add or modify an AGR or interface instance. |
eqcli > backup | : |
Upload a system backup to remote FTP. |
eqcli > boot | : | Set the OS image (A or B) to use on at next boot. |
eqcli > certificate | : | Add or modify an SSL certificate. |
eqcli > cluster | : | Add or modify a cluster or a match rule. |
eqcli > context | : | Display the current command context. |
eqcli > crl | : | Add or modify a Certificate Revocation List (CRL). |
eqcli > date | : | Set the system time. |
eqcli > diags | : | Run the system utilities commands in the 'diags' context. |
eqcli > edit filename | : | Edit a file in the datastore. |
eqcli > ext_services | : | Add or modify a mail server in the 'ext_services' context. |
eqcli > exit | : | Commit all pending configuration changes and exit eqcli. |
eqcli > extended_audit | : | Enable or disable extended audit logging. |
eqcli > failover | : | Enter 'failover' context. |
eqcli > files download ftp_url | : | Download a file onto the FortiADC. <url> := url of file to download. |
eqcli > files edit name | : | Edit a datastore file. |
eqcli > files ftp file server | : | file is the file name. server - url of the FTP server onto which the file should be copied. ftp://[username:password@]hostname[/path]/ |
eqcli > forticare registration | : | Load the Forticare registration information. |
eqcli > guilogo | : | Change the GUI logo of the FortiADC. |
eqcli > halt | : | Shutdown |
eqcli > hostname | : | Set the system hostname. |
eqcli > icmp_interval | : | Set the ICMP probe interval for servers (seconds). |
eqcli > icmp_maxtries | : | Set the maximum number of ICMP probes in a probe interval |
eqcli > icmp_relaxed_probe | : | Global Enable/Disable ICMP relaxed probing. |
eqcli > illb-grp | : | Add or modify the illb group. |
eqcli > llb-gw | : | Add or modify the llb gateway. |
eqcli > ollb-grp | : | Add or modify the ollb group. |
eqcli > interface | : | Modify an interface. |
eqcli > keywords | : | Display reserved keywords. These can not be used as names in eqcli. |
eqcli > license upgrade url | : | Load an upgrade image. |
eqcli > locale | : | Set the locale of the system. |
eqcli > name-server | : |
Add a DNS name server entry. One IP address can be specified on the command line. A total of 3 IP addresses can be added. DNS is enabled as long as there is one entry in the list. primary : Add a primary name-server |
eqcli > no | : | Reset a parameter or delete an object. |
eqcli > ntp | : | Enable or disable NTP (without changing the NTP configuration). |
eqcli > ntp-server | : | Set the NTP server name. |
eqcli > peer | : | Add or modify a failover peer. |
eqcli > ping | : | Send ICMP or ICMPv6 ECHO_REQUEST packets to a host. |
eqcli > quit | : | Discards the entered configuration changes and exits eqcli. |
eqcli > rebalance | : | Rebalance clusters among failover group members. Each cluster will be re-started on its 'preferred peer'. |
eqcli > reboot | : | Reboot FortiADC. |
eqcli > resp | : | Add or modify responders. |
eqcli > restore | : | Restore a system backup from remote FTP. |
eqcli > run_script filename | : | Run an eqcli command script. |
eqcli > sbr | : | Display the IPv4 and IPv6 Default Source Selection Table, Source Routing Table, IPv4 and IPv6 Filter Rules, and IP NAT Rules. |
eqcli > server | : | Add or modify a server. |
eqcli > services [!]http, {!]ssh,[!]snmp |
: | Set the default GUI and SSH access. These settings apply if ‘services' is not set in a VLAN configuration. |
eqcli > show | : | Display configuration information. With no arguments, displays global parameters. Otherwise, displays either a list of all objects of one type (for example, 'cluster', 'srvpool', 'vlan') or the configuration of a specific object. |
eqalic > smart_control name parameter | : | Add or modify a Smart Control. |
eqcli > snmp | : | Add SNMP parameters. |
eqcli > srvpool | : | Add or modify a server pool. |
eqcli > stats | : | Display global statistics. |
eqcli > syslog | : | Enable or disable remote logging. |
eqcli > syslog-server | : | Set the syslog server IP address |
eqcli > timezone | : | Set the system timezone. |
eqcli > traceroute | : | Trace the network path to a host using UDP packets. |
eqcli > tunnel | : | Set the tunnel. |
eqcli > upgrade | : | Load an upgrade image. |
eqcli > user | : | Create or modify a user object. |
eqcli > version | : | Show detailed system and version information. |
eqcli > vlan | : | Add or modify a VLAN or subnet. |