The following table describes how to perform subnet tasks using the CLI and the GUI:
Task |
Command / Procedure |
|
Add a subnet |
CLI |
eqcli > vlan name subnet name [parameters] |
GUI |
1. Click on the System configuration tab on the left pane. 2. Click on the arrow (u) next to Network to expand the branch. 3. Click on the arrow (u) next to VLANs to expand the branch to display all configured VLANs 4. Right-click a VLAN name 5. Select Add Subnet from the pop up command menu. 6. Enter a Subnet Name, IP Address and Default Route in the pop up window on the right. 7. Click Commit. |
|
Remove a subnet |
CLI |
eqcli > no vlan name subnet name |
GUI |
1. Click on the System configuration tab on the left pane. 2. Click on the arrow (u) next to Network to expand the branch. 3. Click on the arrow (u) next to VLANs to expand the branch to display all configured VLANs 4.Click on the arrow (u) next to a specific VLAN to expand the branch to display all configured subnets . 5. Right-click the name of the subnet you want to delete. 6. Select Delete Subnet from the popup command menu. 7. Click Confirm. |
|
Modify a subnet |
CLI |
eqcli > vlan name subnet name [parameters] |
GUI |
1. Click on the System configuration tab on the left pane. 2. Click on the arrow (u) next to Network to expand the branch. 3. Click on the arrow (u) next to VLANs to expand the branch to display all configured VLANs 4.Click on the arrow (u) next to a specific VLAN to expand the branch to display all configured subnets . 4. Click the name of the subnet you want to modify. The configuration displays appear in the right pane. 5. Edit the subnet configuration using the controls on each tab. 6. Click Commit before navigating away to apply your changes. |
|
Display summary of all subnets in a VLAN |
CLI |
eqcli > show vlan name subnet |
GUI |
N/A |
|
Display details for a subnet |
CLI |
eqcli > show vlan name subnet name |
GUI |
1. Click on the System configuration tab on the left pane. 2. Click on the arrow (u) next to Network to expand the branch. 3. Click on the arrow (u) next to VLANs to expand the branch to display all configured VLANs 4.Click on the arrow (u) next to a specific VLAN to expand the branch to display all configured subnets . 5. Click a subnet name to display the configuration displays for that subnet in the right pane. |