The following Global Parameters are configured on this screen (tab). Click on Commit to save your parameters or Reset to return the default values.
|
Hostname |
This is FortiADC’s host name (default: ). |
|
Locale |
Sets the FortiADC locale. en to set English locale. ja to set Japanese locale. |
DNS Section
|
Domain Name Server (Primary, Secondary, or Tertiary) |
If using a Domain Name Server, the Domain Name Server FortiADC will use. |
ICMP Health Checks Section
|
ICMP Relaxed Probe (flag) |
Global Enable/Disable ICMP relaxed probing. When enabled, if a server probes "down", but has not previously probed "up", it will be marked "up". Setting of this flag prevents the sudden reporting of servers as being "down" following an upgrade. |
|
ICMP Probe Maximum Tries |
Enables probing servers using ICMP echo (ping) probes. These probes are 5 seconds apart. If a server does not respond to an ICMP probe and it has attempted to probe the number of times specified, it is marked down only if there are no other probes (TCP, ACV, or server agent) active for the cluster. This value must be greater than 1. |
|
ICMP Probe Interval |
A timer specifying the length of time (in seconds) during which a successful server probe must occur, or the server is marked "down". At least one ICMP probe of a server must have succeeded since the last FortiADC reboot, or failed ICMP probes for the server will be ignored and the server will be marked "UP. |
Global Service Settings Flags
The permitted VLAN services are HTTP, HTTPS, SNMP, SSH are set globally, here. Use the check boxes to enable.