How to set up your FortiADC : Updating the firmware : Installing alternate firmware : Booting from the alternate partition
 
Booting from the alternate partition
System > Maintenance > Backup & Restore lists the firmware versions currently installed on your FortiADC appliance.
Each appliance can have up to two firmware versions installed. Each firmware version is stored in a separate partition. The partition whose firmware is currently running is noted with a green circle in the Active column.
To boot into alternate firmware via the web UI
1. Install firmware onto the alternate partition (see “Installing alternate firmware”).
2. Go to System > Maintenance > Backup & Restore.
3. In the Firmware area, click Boot Alternate firmware.
A warning message appears.
4. Click OK.
A message appears instructing you to refresh your browser in a few minutes after the appliance has booted the other firmware.
To boot into alternate firmware via the local console CLI
1. Install firmware onto the alternate partition (see “Installing alternate firmware”).
2. Connect your management computer to the FortiADC console port using a RJ-45-to-DB-9 serial cable or a null-modem cable.
3. Initiate a connection from your management computer to the CLI of the FortiADC appliance, and log in as the admin administrator.
For details, see “Connecting to the web UI or CLI”.
4. Enter the following command to restart the FortiADC appliance:
execute reboot
5. As the FortiADC appliances starts, a series of system startup messages appear.
Press any key to display configuration menu........
Immediately press a key to interrupt the system startup.
 
You have only 3 seconds to press a key. If you do not press a key soon enough, the FortiADC appliance reboots and you must log in and repeat the execute reboot command.
If you successfully interrupt the startup process, the following messages appears:
[G]: Get firmware image from TFTP server.
[F]: Format boot device.
[B]: Boot with backup firmware and set as default.
[Q]: Quit menu and continue to boot with default firmware.
[H]: Display this list of options.

Enter G,F,B,Q,or H:

Please connect TFTP server to Ethernet port "1".
6. Type B to reboot and use the backup firmware.
See also
Installing alternate firmware