Scope

This document describes how to use the Web-based Manager to set up and configure a FortiAnalyzer unit. It assumes you have already successfully installed the FortiAnalyzer unit by following the instructions in your unit’s QuickStart guide.

At this stage:

• You have administrative access to the Web-based Manager and/or Command Line Interface (CLI), and

• The FortiAnalyzer unit can connect to the Web-based Manager and CLI.

This document explains how to use the Web-based Manager to:

• Maintain the FortiAnalyzer unit, including backups

• Configure basic settings, such as system time, DNS settings, administrator passwords, and network interfaces

• Configure advanced features, such as adding devices, DLP archiving, logging, and reporting.

This document does not cover commands for the command line interface (CLI). For information on the CLI, see the FortiAnalyzer v5.0 CLI Reference.