FortiOS 5.6 Online Help Link FortiOS 5.4 Online Help Link FortiOS 5.2 Online Help Link FortiOS 5.0 Online Help Link

Home > Online Help

> Chapter 21 - Networking > Interfaces > Probing interfaces

Probing interfaces

Server probes can be used on interfaces. In order for this to occur, the probe response mode must first be configured, then the probe response must be allowed administrative access on the interface. The probe response mode can be:

none Disable probe.
http-probe HTTP probe.
twamp Two way active measurement protocol.

Both steps must be done through the CLI.

Configuring the probe

config system probe-response

set mode http-probe

end

Allowing the probe response to have administrative access to the interface

config system interface

edit <port>

set allowaccess probe-response

end