FortiOS 5.6 Online Help Link FortiOS 5.4 Online Help Link FortiOS 5.2 Online Help Link FortiOS 5.0 Online Help Link
> Chapter 16 - IPsec VPN > L2TP and IPsec (Microsoft VPN)

Home > Online Help

L2TP and IPsec (Microsoft VPN)

This section describes how to set up a VPN that is compatible with the Microsoft Windows native VPN, which is Layer 2 Tunneling Protocol (L2TP) with IPsec encryption.

The following topics are included in this section:

For troubleshooting information, refer to Troubleshooting L2TP and IPsec.

Overview

The topology of a VPN for Microsoft Windows dialup clients is very similar to the topology for FortiClient Endpoint Security clients.

Example FortiGate VPN configuration with Microsoft clients

For users, the difference is that instead of installing and using the FortiClient application, they configure a network connection using the software built into the Microsoft Windows operating system. Starting in FortiOS 4.0 MR2, you can configure a FortiGate unit to work with unmodified Microsoft VPN client software.

Layer 2 Tunneling Protocol (L2TP)

L2TP is a tunneling protocol published in 1999 that is used with VPNs, as the name suggests. Microsoft Windows operating system has a built-in L2TP client starting since Windows 2000. Mac OS X 10.3 system and higher also have a built-in client.

L2TP provides no encryption and used UDP port 1701. IPsec is used to secure L2TP packets. The initiator of the L2TP tunnel is called the L2TP Access Concentrator (LAC).

L2TP and IPsec is supported for native Windows XP, Windows Vista and Mac OSX native VPN clients. However, in Mac OSX (OSX 10.6.3, including patch releases) the L2TP feature does not work properly on the Mac OS side.

Assumptions

The following assumptions have been made for this example:

  • L2TP protocol traffic is allowed through network firewalls (TCP and UDP port 1701)
  • User has Microsoft Windows 2000 or higher — a Windows version that supports L2TP